Plastic Tap 12mm, 40mm Lid, Ventilation
€5.37
In stock
Only 193 left
SKU
30330
Ventilated (air enters as liquid drains) medium-speed plastic tap with a 12 mm inner diameter
. Faster than 8 mm serving plastic taps but significantly slower than 18 mm ventilated plastic taps.
The body of the plastic tap is made of LD polyethylene, the spigot is made of polypropylene. High resistance to chemicals, food-approved, and alcohol-resistant.
The spout of the plastic tap only protrudes 1 cm, so it's not as easy to refill as 8 mm plastic taps with a 25 mm protruding spigot. If you attach a hose, you remove the ventilation. If you're going to attach hoses for automatic battery water filling or similar, plastic taps with an 8 mm spout and without ventilation are better.
Equipped with a 40 mm standard cap that fits many plastic jugs from 2.5 to 15 liters (always measure before ordering).
. Faster than 8 mm serving plastic taps but significantly slower than 18 mm ventilated plastic taps.
The body of the plastic tap is made of LD polyethylene, the spigot is made of polypropylene. High resistance to chemicals, food-approved, and alcohol-resistant.
The spout of the plastic tap only protrudes 1 cm, so it's not as easy to refill as 8 mm plastic taps with a 25 mm protruding spigot. If you attach a hose, you remove the ventilation. If you're going to attach hoses for automatic battery water filling or similar, plastic taps with an 8 mm spout and without ventilation are better.
Equipped with a 40 mm standard cap that fits many plastic jugs from 2.5 to 15 liters (always measure before ordering).