Plastic Tap 18 mm Quick Male Vent, for 3/4" Threaded Hole
€5.37
In stock
Only 35 left
SKU
30325
The plastic tap fits in the small hole in standard plastic barrels, metal barrels, and stainless steel barrels. It has a 3/4" thread, this threaded opening is also found in some super strong jugs. There are also various lids or converters with a hole with this 3/4 inch thread, so that the plastic tap can be mounted in large lids on barrels, jugs, and containers.
The flow is very fast due to the 18 mm inner diameter and the Plastic Tap 18 mm fast is equipped with its own vent that lets in air while the liquid flows out.
The plastic tap is equipped with a rubber gasket. It can also be mounted in your own containers and secured with black plastic nut number 30326 on the inside.
Suitable also for thicker liquids. The plastic tap is open when it is to the left and closed straight ahead and to the right. Body made of HDPE and spigot made of pp.
Good plastic tap for Sake, wine, spirits, vinegar, water, homebrew, other food and beverages.
Also for photo chemicals, agricultural chemicals, reagents, cleaning agents and many other chemicals and liquids. Also for caramel color (which is on low heat), glycerin, syrup, and other viscous products.
The flow is very fast due to the 18 mm inner diameter and the Plastic Tap 18 mm fast is equipped with its own vent that lets in air while the liquid flows out.
The plastic tap is equipped with a rubber gasket. It can also be mounted in your own containers and secured with black plastic nut number 30326 on the inside.
Suitable also for thicker liquids. The plastic tap is open when it is to the left and closed straight ahead and to the right. Body made of HDPE and spigot made of pp.
Good plastic tap for Sake, wine, spirits, vinegar, water, homebrew, other food and beverages.
Also for photo chemicals, agricultural chemicals, reagents, cleaning agents and many other chemicals and liquids. Also for caramel color (which is on low heat), glycerin, syrup, and other viscous products.